Camera Changer widget

The Camera Changer (known prior to version 2.12 as the Virtual Window) acts as a regular camera image but its camera can be changed. Cameras can be selected with a menu, a numeric keypad, and a joystick.

Adding the widget

1. Go to Edit Mode.
2. Select Widget > Camera changer
   
   

Selecting camera

Click Select Camera from the Camera Changer. Use the arrow buttons to select next and previous cameras.

Select camera with a numeric keypad or joystick

Cameras have to be numbered first.

1. Go to Menu > Settings > Cameras > (camera name) > General > Number.
2. Set a number.
3. Do this for all the cameras that you want to select with numeric keypads.

To show a camera number next to a camera name, check the checkbox at Menu > Settings > Interface > Show camera number.

The first number is the site number and the number after : is the camera number.

Change camera image from numeric keypad by selecting the camera changer number and a camera number. If the desired Camera Changer is already active, there is no need to select it again.

Selection from keyboard numpad

1. Press Camera Changer number e.g. Numpad 1
2. Press Numpad /
3. Press camera number e.g. Numpad 3
4. Press Numpad Enter

Loop cameras on an interval

Cameras can be looped in camera changer on a set interval. Any number of cameras can be selected to a camera changer. Cameras can be selected on multiple camera changers simultaneously.

To select cameras to loop, open Loop cameras > Select cameras... from the camera changer menu.

To set the interval, select Time Interval....

To play/pause the loop, select Play or Pause.